Product Description
Once you tap into the proprietary technology of Alexapure Pro®, you will never worry about the safety of your family's drinking water again. When it's time to change your gravity core filter, don't accept anything less than authentic Alexapure products.
Alexapure is the only brand of gravity-fed and portable water filters we carry because we know that you expect the very best. They are 100% Made in the USA. Trust Alexapure to supply safe, healthy drinking water for every member of your family. We do.
Alexapure Pro Description
The Pro has the capacity for up to 4 filter units, allowing you to increase the flow rate exponentially without sacrificing water quality. When you notice a drastic change in the flow rate of your Alexapure Pro, it is time to change the filter(s). Use only genuine Alexapure replacement filters to ensure the highest quality result. Each filter has a capacity of up to 5,000 gallons, depending on the quality of your water source.
Key Features and Benefits:
Designed for exclusive use in the Alexapure Pro Water Purifier
Proprietary gravity block ionic adsorption technology
Silver-impregnated ceramic outer shell that multiplies filtering power
Ready right out of the box - no priming necessary
Groundbreaking engineering for removal of up to 99.9999% of sediment, bacteria, lead, pesticides, chromium, heavy metals, chlorine and more
100% Made in the USA
The filter is tested to NSF/ANSI Standards and uses NSF/FDA approved materials.
Replacement Filter Package Contents:
One full-size Alexapure Pro filter unit
Installation hardware
Instructions for Replacing the Alexapure Pro Filter
Remove the lid from the upper chamber
Remove the empty upper chamber, steadying the old filter in one hand
Reach beneath the filter and remove the wing nut holding the unit in place
Slide out the old filter and discard it
Remove the new Alexapure filter element from its packaging
Unscrew the plastic wing nut, leaving the washer in place. This filter is packed in an alcohol-water mixture to ensure that it is microbiologically sterile when it arrives at your home
Thread the stem of the filter through one of the four holes in the floor of the upper chamber, taking care to hold the filter straight
Secure it beneath by replacing the plastic wing nut
No need to pre-prime your new filter; your Alexapure Pro is ready to use right away
Cleaning and Care of Your Alexapure Pro Filter
This replacement filter provides long-term performance with little maintenance. If you notice build-up on the surface of the ceramic filter shell, carefully remove the filter as described in steps 1 through 3 above. Use a non-abrasive pad and fresh water to clean the unit. Do not use soap. Replace the filter according to steps 7 through 8 above.
