Apeks XTX50 Octopus

Product Description

The XTX50 Octopus has a breathing effort control knob. This allows the diver to desensitize the unit when it not being used.

The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used. Press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc.

Can be converted from a right-handed hose configuration to a left handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure MUST only be performed by an APEKS Authorized Service Technician.

Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable

Suitable for coldwater use

Compatible with EAN40 out of the box

Pneumatically-balanced second stage results in smooth, easy breathing

The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.

The 2nd stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.

A silicone exhaust valve improves the breathing performance of the regulator

A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water

Specs

Orientation Convertible LH or RH

Coldwater Use Yes

Type of second stage Pneumatically balanced

Breathing Effort Control Knob Yes

Integrated Venturi Lever Yes

Heat Exchanger for freezing resistance Yes

Hose type Braided Flexi-hose

Nitrox compatible Yes to 40% O2 when new, out of the box / Can be O2 cleaned to100%