Product Description
DPU4545He Reversible Vibratory Plate
5100009660Categories Compaction ,Vibratory Plates ,Reversible Vibratory Plates ,Product Detalisntuitive control handle: Control of the direction of movement as well as the speed in the same movement sequence
- without changing grip, both hands stay on the control handleLow hand-arm-vibrations (well below 2.5 m/s)Electronic hour meterHeight adjustable center poleElectric starter with a loud signal tone generator to avoid unnecessary battery dischargeSafety setting: Machine moves away from the operator if the control handle is releasedLarge-sized engine with high power reserves for a long service lifeMotor protection: Not possible to start with a low oil levelThick, wear resistant base plate made from nodular cast ironThe engine and tank are protected by a sturdy frame, which is also useful for a sturdy tie-down during transportVery sturdy, free from play center pole lock, easy to actuate for a secure transportLarge lifting eye that can be offset to neutral heightAll maintenance accesses are quick and easy to reachSelf-adjusting V-belt and maintenance-free alternator
ENVIRONMENT DATA-1
Storage temperature range : -15 - 40 C
Sound level LpA : 94,0 dB(A)
Sound level LpA (Standard) : EN 500-4
Operating temperature range : -15 - 40 C
Uncertainty in measurement HAV : 0,5 m/s2
Sound power LWA, measured : 107,0 dB(A)
Sound power LWA, guaranteed : 108,0 dB(A)
Sound power LWA (Standard) : EN 500-4, 2000/14/EG
HAV summation (Standard) : EN 500-4
HAV summation (average value) :
ENVIRONMENT DATA-2
Storage temperature range : 5 - 104 F
Sound level LpA : 94,0 dB(A)
Sound level LpA (Standard) : EN 500-4
Operating temperature range : 5 - 104 F
Uncertainty in measurement HAV : 1,6 ft/s2
Sound power LWA, measured : 107,0 dB(A)
Sound power LWA, guaranteed : 108,0 dB(A)
HAV summation (average value) : 8,2 ft/s2
Sound power LWA (Standard) : EN 500-4, 2000/14/EG
HAV summation (Standard) : EN 500-4
MECHANICAL - OUTPUT DETAILS-1
Vibrations : 4.140 1/min
Vibrations (Hz) : 69 Hz
Centrifugal force : 45,000 kN
Area capacity : 910 m2/h
Forward Running : 25,00 m/min
Gradeability : 57,7 %
Transmission : FKR
MECHANICAL - OUTPUT DETAILS-2
Vibrations : 4.140 1/min
Vibrations (Hz) : 69 Hz
Centrifugal force : 10.116 lbf
Area capacity : 9.795,2 ft2/h
Forward Running : 1,4 fps
Gradeability : 57,7 %
Transmission : FKR
Engine-1
Cooling : air cooling
Engine type : Diesel engine
Engine operating mode : four-stroke
Fuel : Diesel EN 590
Fuel consumption-Ib/h (Unite) : 1,60 L/hr
Cylinder : 1
Cylinder capacity : 445 cm3
Tank capacity : 5,00 l
Oil filling max. : 1,10 l
Power rating max. : 7,0 KW
Engine speed (Power max.) : 3.600 1/min
Standard (Operating power) : ISO 3046 IFN
Operating Engine speed : 3.000 1/min
Engine Manufacturer : Hatz
Nominal Engine speed : 2.850 1/min
Effective power : 6,4 KW
Oil specification : SAE 10W-40
Standard (Effective power) : ISO 3046 IFN
Standard (Power max.) : ISO 3046 IFN
Operating power : 4,9 KW
Oil filling min. : 0,80 l
Upper idling speed ex load : 3.060 1/min
Exhaust-gas limit : EPA/CARB FLEX
Starter battery Voltage : 12 V
Starter type : E-starter
Oil volume incl. filter change : 1,20 l
Air cleaner : dry air filter
Battery capacity (nom. value) : 45 Ah
Inclined position max. : 30,0
Engine-2
Engine type : Diesel engine
Engine operating mode : four-stroke
Fuel : Diesel EN 590
Fuel consumption -GPH US (Unite) : 0,4 GPH US
Cylinder : 1
Cylinder capacity : 27,2 Inch3
Tank capacity : 1,3 gal US
Oil filling max. : 0,3 gal US
Power rating max. : 9,4 hp
Engine speed (Power max.) : 3.600 1/min
Standard (Operating power) : ISO 3046 IFN
Operating Engine speed : 3.000 1/min
Engine Manufacturer : Hatz
Nominal Engine speed : 2.850 1/min
Effective power : 8,6 hp
Cooling : air cooling
Inclined position max. : 30,0
Oil specification : SAE 10W-40
Standard (Effective power) : ISO 3046 IFN
Upper idling speed ex load : 3.060 1/min
Starter battery Voltage : 12 V
Starter type : E-starter
Exhaust-gas limit : EPA/CARB FLEX
Oil volume incl. filter change : 0,3 gal US
Air cleaner : dry air filter
Battery capacity (nom. value) : 45 Ah
MECHANICAL DETAILS-1
Width : 604 mm
Height : 1.308 mm
Operating weight : 423,0 kg
Length Drawbar in op. pos. : 1.661 mm
Ground clearance : 790 - 914 mm
MECHANICAL DETAILS-2
Width : 23,8 "
Height : 51,5 "
Operating weight : 932,6 lb
Length Drawbar in op. pos. : 65,4 "
Ground clearance : 31,1 - 36,0 "
OPERATING FLUIDS-1
Tank capacity : 5,00 l
Exciter oil volume : 0,75 l
Hydraulic fluid type : Renolin MR 520
Exciter oil type : SAE 10W-40
Hydraulic fluid volume : 0,5 l
OPERATING FLUIDS-2
Tank capacity : 1,3 gal US
Hydraulic fluid type : Renolin MR 520
Exciter oil volume : 0,79 qt US
Exciter oil type : SAE 10W-40
Hydraulic fluid volume : 0,5 qt US
Comes With Vibratory plateStarting crankOperator's manual
