Product Description
PLEASE NOTE: THIS IS AN ADVANCED KIT AND IS NOT RECOMMENDED FOR 3D PRINTING BEGINNERS OR THOSE THAT DO NOT HAVE THE TIME TO TUNE IT TO THEIR OWN APPLICACTIONS. REPKORD ONLY WARRANTIES ON DEFECTIVE PARTS. ALL TUNING AND SUPPORT OF YOUR CR-30 PRINTER AND ITS STOCK PARTS IS HANDLED BY CREALITY. FOR GENERAL CONFIGURATION, OPTIMIZATION AND TUNING RESOURCES WE HIGHLY RECOMMEND THE COMMUNITY RUN 3D PRINT MILL DISCORD CHANNEL HERE.
ENDER 6 COMPATIBILITY NOTE: WHILE SOME HAVE DETERMINED THAT THIS KIT IS USEABLE ON ENDER 6 SOME MODIFICATIONS MAY BE REQUIRED TO MOUNT IT. AS THE STOCK MOUNT HOLES ARE NOT DESIGNED FOR THIS ANY MODIFICATIONS FOR THIS USE ARE NON-REFUNDABLE AND AT YOUR OWN RISK.
Part of the "essential upgrades" kit for the Creality CR-30. Designed by NAK3D designs and produced by LDO Motors, Repkord brings you the essential stepper motor upgrades.
Adds support to the long stepper shaft to avoid bending and breaking.
0.9 degree stepper motors vs stock 1.8 degree steppers for better resolution.
Motors run significantly cooler: over 20C cooler than stock while printing.
Easy bolt on replacement. No firmware updates required.
Installs in less than 15 minutes.
Machined and anodized aluminum for maximum strength.
Includes all required mounting hardware
RESOURCES:
Install Video By Repkord
Original Install Guide By NAK3D Designs
LDO Stepper Motor Specifications
CR-30 Discord Users Group
Hourly Consulting / Tuning Support Services
Usually ships same or next day. 
