Palm O2 Oxygen Nitrox Analyzer

Product Description

Simple to use . . . accurate reliable results 

One touch calibration . . . 100% O2 or air 

Long battery life . . . 13,000 hrs of use 

Advanced sensor technology 

Certified ISO 9001:2008 QA System 

This palm size oxygen analyzer features an advanced galvanic oxygen sensor that measures from 0.05% to 100% oxygen over a 32 month operating life with no maintenance required. 13,000 hours of battery use and wide variety of optional accessories make it an ideal cost effective choice for checking O2 levels of compressed air scuba tanks and Nitrox mixes.

Accuracy:

Analysis: 0-100% oxygen

Application: Verify O2 content of scuba compressed air tanks

Calibration: Certified dry 100% oxygen or air after 8 hrs of use

Compensation: Temperature

Connections: 1x16 mm thread  (see options below)

Controls: Soft touch keypad for ON/OFF and Calibration

Dimensions: 2.72” x 4.1” x 1.35”; weight 7 oz. (196 grams)

Display: 3 digit  LCD 1.1” x .625”; resolution 0.1% O2

Flow Sensitivity: None between 0.2 to 10 liters per minute

Humidity: Non-condensing 0-95% RH

Linearity: + 1% under constant conditions

Pressure: Inlet - ambient or regulated; vent - atmospheric

Power:  (2) 1.5V AA alkaline batteries; 13,000 hrs of use

Response Time: 90% of final FS reading in 10 seconds

Sensitivity:

Sensor: AII-11-75-PO2 D

Sensor Life: 32 months in air at 25ºC and 1 atmosphere

Storage Temp.: -20º to 60ºC (-4ºF to 140ºF) on intermittent basis

Temp. Range: 5º to 45ºC  (41ºF to 113ºF)

Warm-up Time: None

Warranty: 12 months analyzer; 12 months sensor