GREASE FITTING P/N 10H35

Product Description

Grease fittings are permanently installed into the bearing by a threaded connection. A nipple connection allows you to attach a grease gun to add lubricants into the bearing.

5/16" Hex. Straight grease zerk. 1/4-28

Taper Thread (SAE-LT)

SAE Standard J534

Case Hardened Head only for extra durability and to protect them from wear due to constant use

Ball check in the head prevents dirt and grit from getting into the fitting

Heavier wall thickness for extra strength

Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion

Stress Relieved and Tempered Carbon Steel Spring

Thread Rolled taper threads

Due to engineering standards, some parts are updated or changed and are assigned a new part number. Previous part number was 10H3. This part is the direct replacement.

Compatible with the following Bobcat machines:

All-Wheel Steer Loaders: A220, A300, A770

Articulated Loaders: 1600, 2000, 2400, 2410

Excavators: 200, 310, 313, 324, 325, 328, 331, 334, 337, 341, 371, 418, 430, 435, E08, E10, E14, E16, E17, E19, E20

Mini Track Loaders: MT50, MT52, MT55, MT85

Skid Steer Loaders: 440, 443, 450, 453, 463, 500, 506, 530, 533, 540, 542, 543, 553, 600, 610, 611, 620, 630, 631, 632, 641, 642, 643, 645, 653, 700, 720, 721, 722, 730, 731, 732, 741, 742, 743, 751, 753, 763, 773, 7753, 825, 843, 853, 863, 873, 883, 905, 907, 908, 914, 943, 953, 963, 970, 974, 975, 980, 1213, S100, S130, S150, S160, S175, S185, S205, S220, S250, S300, S330, S450, S510, S530, S550, S570, S590, S595, S630, S650, S70, S740, S750, S770, S850

Toolcat Work Machines: 5600, 5610

Track Loaders: 864, T110, T140, T180, T190, T200, T250, T300, T320, T450, T550, T590, T595, T630, T650, T740, T750, T770, T870

Utility Vehicles: 3200, 3400, 3450, 3600, 3650