Product Description
Fitment Information: 2022-2025 Subaru WRX Features: One upgrade that's sure to bring your 2022-2025 WRX to the next level is the Mishimoto performance top-mount intercooler. This top mount intercooler lets your FA24 breathe all the cool boost it could ever want.
The crowning jewel of this kit is our massively upgraded top-mount intercooler and shroud. We've completely revamped the plastic end tank intercooler and replaced it with cast-aluminum end tanks and a high-flow core that's 88 percent larger than stock. The larger core volume allows our intercooler to flow over 40 percent better than stock, taking the strain off your turbo and allowing it to shove more cold air into your engine. We've also added 76 percent more fin surface area to the core, allowing it to transfer heat more effectively and keep outlet temps within 10 degrees of ambient. All those improvements would be for not, though, if we didn't have a way to get cool outside air over the intercooler. To do that, we scaled the intercooler shroud up to expose the entire core to fresh air from the WRX's signature hood scoop. A pre-drilled, tapped, and plugged 1/8-NPT port allow you to easily add temp or boost pressure sensors.
This kit includes everything needed for installation, including new shroud hardware. It's available in black to match any color scheme and, with our Mishimoto Lifetime Warranty, you can drive your WRX at ten-tenths knowing Mishimoto has its and your back. Intercooler Core powder-coat finish: Stealth Black
Shroud color: black Bar-and-plate core reduces restriction by 40.6% for improved efficiency
88% increase in core volume for improved cooling efficiency Lowers outlet temps to less than 10 degrees over ambient for safe performance 35.7% less pressure drop than stock means more boost makes it into the engine 76% increase in fin surface area for superior heat transfer Includes expanded shrouding for maximum airflow and coverage Cold-side tank include 1/8-NPT port for boost or temp sensors Cast aluminum end tanks reduce failure points for high boost applications Includes everything needed for installation, including shroud hardware Direct fitment Mishimoto Lifetime Warranty Specs: Maximum Recommended Boost Pressure: 100psi Maximum Recommended Horsepower: 600 Overall length: 24.51 inches Overall height: 12.96 inches Overall width: 4.38 inches Core type: Bar-and-Plate Core thickness: 4 inches Core length: 20.5 inches Core height: 7 inches What's in the Box? (1) Mishimoto Performance Intercooler (1) Mishimoto Intercooler Shroud (36) Shroud Plastic Rivets (11) Shroud Mount Panel Clips Installation note: Upon removal of factory intercooler, inspect the OEM inlet gasket and replace with the OEM Subaru part number 21896AA150 if any areas appear damaged or warped.
California Prop 65 Warning: Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.p65warnings.ca.gov.
Usually ships same or next day. 
